Documentation Home
MySQL 8.4 Reference Manual
Related Documentation Download this Manual
PDF (US Ltr) - 39.8Mb
PDF (A4) - 39.9Mb
Man Pages (TGZ) - 257.9Kb
Man Pages (Zip) - 364.9Kb
Info (Gzip) - 4.0Mb
Info (Zip) - 4.0Mb


MySQL 8.4 Reference Manual  /  ...  /  The LOCK_ORDER Tool

7.9.3 LOCK_ORDER 工具

The MySQL server is a multithreaded application that uses numerous internal locking and lock-related primitives, such as mutexes, rwlocks (including prlocks and sxlocks), conditions, and files. Within the server, the set of lock-related objects changes with implementation of new features and code refactoring for performance improvements. As with any multithreaded application that uses locking primitives, there is always a risk of encountering a deadlock during execution when multiple locks are held at once. For MySQL, the effect of a deadlock is catastrophic, causing a complete loss of service.

To enable detection of lock-acquisition deadlocks and enforcement that runtime execution is free of them, MySQL supports LOCK_ORDER tooling. This enables a lock-order dependency graph to be defined as part of server design, and server runtime checking to ensure that lock acquisition is acyclic and that execution paths comply with the graph.

This section provides information about using the LOCK_ORDER tool, but only at a basic level. For complete details, see the Lock Order section of the MySQL Server Doxygen documentation, available at https://dev.mysql.com/doc/index-other.html.

The LOCK_ORDER tool is intended for debugging the server, not for production use.

To use the LOCK_ORDER tool, follow this procedure:

  1. Build MySQL from source, configuring it with the -DWITH_LOCK_ORDER=ON CMake option so that the build includes LOCK_ORDER tooling.

    Note

    With the WITH_LOCK_ORDER option enabled, MySQL builds require the flex program.

  2. To run the server with the LOCK_ORDER tool enabled, enable the lock_order system variable at server startup. Several other system variables for LOCK_ORDER configuration are available as well.

  3. For MySQL test suite operation, mysql-test-run.pl has a --lock-order option that controls whether to enable the LOCK_ORDER tool during test case execution.

The system variables described following configure operation of the LOCK_ORDER tool, assuming that MySQL has been built to include LOCK_ORDER tooling. The primary variable is lock_order, which indicates whether to enable the LOCK_ORDER tool at runtime:

  • If lock_order is disabled (the default), no other LOCK_ORDER system variables have any effect.

  • If lock_order is enabled, the other system variables configure which LOCK_ORDER features to enable.

Note

In general, it is intended that the LOCK_ORDER tool be configured by executing mysql-test-run.pl with the --lock-order option, and for mysql-test-run.pl to set LOCK_ORDER system variables to appropriate values.

All LOCK_ORDER system variables must be set at server startup. At runtime, their values are visible but cannot be changed.

Some system variables exist in pairs, such as lock_order_debug_loop and lock_order_trace_loop. For such pairs, the variables are distinguished as follows when the condition occurs with which they are associated:

  • If the _debug_ variable is enabled, a debug assertion is raised.

  • If the _trace_ variable is enabled, an error is printed to the logs.

Table 7.8 LOCK_ORDER System Variable Summary

Variable Name Variable Type Variable Scope
lock_order Boolean Global
lock_order_debug_loop Boolean Global
lock_order_debug_missing_arc Boolean Global
lock_order_debug_missing_key Boolean Global
lock_order_debug_missing_unlock Boolean Global
lock_order_dependencies File name Global
lock_order_extra_dependencies File name Global
lock_order_output_directory Directory name Global
lock_order_print_txt Boolean Global
lock_order_trace_loop Boolean Global
lock_order_trace_missing_arc Boolean Global
lock_order_trace_missing_key Boolean Global
lock_order_trace_missing_unlock Boolean Global

  • lock_order

    Command-Line Format --lock-order[={OFF|ON}]
    System Variable lock_order
    Scope Global
    Dynamic No
    SET_VAR Hint Applies No
    Type Boolean
    Default Value OFF

    Whether to enable the LOCK_ORDER tool at runtime. If lock_order is disabled (the default), no other LOCK_ORDER system variables have any effect. If lock_order is enabled, the other system variables configure which LOCK_ORDER features to enable.

    If lock_order is enabled, an error is raised if the server encounters a lock-acquisition sequence that is not declared in the lock-order graph.

  • lock_order_debug_loop

    Command-Line Format --lock-order-debug-loop[={OFF|ON}]
    System Variable lock_order_debug_loop
    Scope Global
    Dynamic No
    SET_VAR Hint Applies No
    Type Boolean
    Default Value OFF

    Whether the LOCK_ORDER tool causes a debug assertion failure when it encounters a dependency that is flagged as a loop in the lock-order graph.

  • lock_order_debug_missing_arc

    Command-Line Format --lock-order-debug-missing-arc[={OFF|ON}]
    System Variable lock_order_debug_missing_arc
    Scope Global
    Dynamic No
    SET_VAR Hint Applies No
    Type Boolean
    Default Value OFF

    Whether the LOCK_ORDER tool causes a debug assertion failure when it encounters a dependency that is not declared in the lock-order graph.

  • lock_order_debug_missing_key

    Command-Line Format --lock-order-debug-missing-key[={OFF|ON}]
    System Variable lock_order_debug_missing_key
    Scope Global
    Dynamic No
    SET_VAR Hint Applies No
    Type Boolean
    Default Value OFF

    Whether the LOCK_ORDER tool causes a debug assertion failure when it encounters an object that is not properly instrumented with the Performance Schema.

  • lock_order_debug_missing_unlock

    Command-Line Format --lock-order-debug-missing-unlock[={OFF|ON}]
    System Variable lock_order_debug_missing_unlock
    Scope Global
    Dynamic No
    SET_VAR Hint Applies No
    Type Boolean
    Default Value OFF

    Whether the LOCK_ORDER tool causes a debug assertion failure when it encounters a lock that is destroyed while still held.

  • lock_order_dependencies

    Command-Line Format --lock-order-dependencies=file_name
    System Variable lock_order_dependencies
    Scope Global
    Dynamic No
    SET_VAR Hint Applies No
    Type File name
    Default Value empty string

    The path to the lock_order_dependencies.txt file that defines the server lock-order dependency graph.

    It is permitted to specify no dependencies. An empty dependency graph is used in this case.

  • lock_order_extra_dependencies

    Command-Line Format --lock-order-extra-dependencies=file_name
    System Variable lock_order_extra_dependencies
    Scope Global
    Dynamic No
    SET_VAR Hint Applies No
    Type File name
    Default Value empty string

    The path to a file containing additional dependencies for the lock-order dependency graph. This is useful to amend the primary server dependency graph, defined in the lock_order_dependencies.txt file, with additional dependencies describing the behavior of third party code. (The alternative is to modify lock_order_dependencies.txt itself, which is not encouraged.)

    If this variable is not set, no secondary file is used.

  • lock_order_output_directory

    Command-Line Format --lock-order-output-directory=dir_name
    System Variable lock_order_output_directory
    Scope Global
    Dynamic No
    SET_VAR Hint Applies No
    Type Directory name
    Default Value empty string

    The directory where the LOCK_ORDER tool writes its logs. If this variable is not set, the default is the current directory.

  • lock_order_print_txt

    Command-Line Format --lock-order-print-txt[={OFF|ON}]
    System Variable lock_order_print_txt
    Scope Global
    Dynamic No
    SET_VAR Hint Applies No
    Type Boolean
    Default Value OFF

    Whether the LOCK_ORDER tool performs a lock-order graph analysis and prints a textual report. The report includes any lock-acquisition cycles detected.

  • lock_order_trace_loop

    Command-Line Format --lock-order-trace-loop[={OFF|ON}]
    System Variable lock_order_trace_loop
    Scope Global
    Dynamic No
    SET_VAR Hint Applies No
    Type Boolean
    Default Value OFF

    Whether the LOCK_ORDER tool prints a trace in the log file when it encounters a dependency that is flagged as a loop in the lock-order graph.

  • lock_order_trace_missing_arc

    Command-Line Format --lock-order-trace-missing-arc[={OFF|ON}]
    System Variable lock_order_trace_missing_arc
    Scope Global
    Dynamic No
    SET_VAR Hint Applies No
    Type Boolean
    Default Value ON

    Whether the LOCK_ORDER tool prints a trace in the log file when it encounters a dependency that is not declared in the lock-order graph.

  • lock_order_trace_missing_key

    Command-Line Format --lock-order-trace-missing-key[={OFF|ON}]
    System Variable lock_order_trace_missing_key
    Scope Global
    Dynamic No
    SET_VAR Hint Applies No
    Type Boolean
    Default Value OFF

    Whether the LOCK_ORDER tool prints a trace in the log file when it encounters an object that is not properly instrumented with the Performance Schema.

  • lock_order_trace_missing_unlock

    Command-Line Format --lock-order-trace-missing-unlock[={OFF|ON}]
    System Variable lock_order_trace_missing_unlock
    Scope Global
    Dynamic No
    SET_VAR Hint Applies No
    Type Boolean
    Default Value ON

    Whether the LOCK_ORDER tool prints a trace in the log file when it encounters a lock that is destroyed while still held.